For smoothing damaged and rough masonry and render

Ready to use Skimcoat filler can be applied manually or with an airless spray machine (min flow rate 5L/min) to cover damaged and rough render and masonry, resulting in a smooth, ready to paint surface. Ideal for large surface areas thanks to its smooth application. The lightweight formula is also flexible, resisting cracking once dry. Offers excellent adhesion to all types of new or renovated surfaces: masonry, cement and concrete based surfaces. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.

The typical recommended application thickness is 1.5mm, maximum 5mm

Renovation Skimcoat can be applied to either new or renovated substrates, unpainted or painted:
- Gypsum plaster, plasterboards/drywall lining
- Old painted surfaces, cement, concrete, cellular concrete
- Old textured surfaces, breeze blocks, bricks, and stone.

Renovation Skimcoat can be overcoated with any type of filler, paint or wall coating

Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.