An interior and exterior, oil based, low sheen finish for wood, metal and masonry
Wood, metal and masonry
An interior and exterior, oil based, low sheen finish for wood, metal and masonry Wood, metal and masonry
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Metal Primer on ferrous metals, Coo-Var Alkali Resisting Primer on concrete.
Coo-Var Eggshell Finish
Average Rating
Write a Review
Write a Review
- Coovar
